Yongnuo YN-560III 2.4G WirelessTrigger Speedlight Flash For Nikon Canon
YN-560 III Speedlight Flash,full support for RF-603,RF-602 wireless transmitter,the same YN560-III can respectively receive signals it RF-603, RF-602 wireless transmitter sends out. -
-Built-in Wi-creation infinite
-Using RF-602/RF-603 2.4G ultra-long-range wireless flash system
Adopted by global users trust the allways RF-602/RF-603 wireless flash system. Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above.
-Full support for RF-603, RF-602 wireless transmitter
Same YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily.
The the YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use.
-Equipped with power zoom function
ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements.
High index 2.4G radio flash support M / Multi mode.
-Various trigger synchronization, flexible
The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger.
-Equipped with an external power outlet
The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed.
-Equipped with a PC sync port
The YN560-III equipped with a standard PC synchronous port, using a PC sync cord flash sync flash.
Open to the voice prompts, the flash voice prompts work state, so you can focus on the creative process (Note: the sound can be turned off)
-A speeding call back system
Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience, only 4 to 5 seconds; You can also use external charging box call back again accelerated.
-Advanced Options settings
The YN560-III with Advanced Options settings according to their needs, you can customize the flash function.
The YN560-III can automatically save your current operating settings, to facilitate the next time you boot.
-Metal texture hot shoe interface, rugged, reliable, and to the force.
1. Fine tuning the output power
2. Multi-flash Lighting Application
3. Buttons are effective immediately
4. The use of external charging box
5. High-speed continuous shooting
8. Using the built-in Bounce Card
9. Using the built-in Wide-angle Diffuse
Different With YN 560 II:
The YN 560 II supports RX salve mode.
RX salve flash mode can be selected though pressing down button [Triggering Mode].
The slave flash mode is transmitted by 2.4G radio, respeciively supporting YONGNUO wireless trigger RF-602, RF-603.
Choose to support the RF-602 or RF-603 triggering through the Advanced Options settings, provided with 16 channels(CH1-CH16).
Just set the YN560-III and RF-602,RF-603 to the same channel wireless flash can be realized in using.
||M, S1, S2, Multi
|Vertical Rotation Angle
|Horizontal Rotation Angle
||No. 58 meters (ISO 100, 105mm)
||24, 28, 35, 50, 70, 80, 105mm
||60 × 190 ×7 8mm (Extended state)
||Approx. 3s (AA alkaline cell used)
||100~1500 times (AA alkaline cell used)
||Insulated Gate Bipolar Transistor (IGBT)
||hot shoe, PC port and eternal charging port
|Wireless Triggering Distance
||20~25m indoor, 10~15m outdoor
||4×AAsize batteries (Alkaline or Ni-MH are usable)
||8 levels of output control (1/128~1/1), 29 levels of fine tuning
||PentaxK-7, K-x, K-m, K20D, K10D, K200D, K100D
||G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK
||E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1
||EOS5D,5D2 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I],7D, 6D 5D3 60D ,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D , 300D,1100D,1000D 650D 5D2 5D Mark III 5D3 70D 700D
||D3s, D3x, D3, D700, D300s, D300,D200,D100, D90, D80, D70s, D7000,D5100, D5000, D3100,D3000, D60, D40X D800 D600 D7100
Package included :
1 x YN560 III Speedlight Flash For Nikon
1 x Manual
1 x Original Box
1 x Protecting Bag